2026 U.S. cost and quantity estimate
Concrete Cost Per Square Foot
Compare concrete quantities at 4, 5, and 6 inches, modeled material costs, and national installed planning totals.
Concrete Cost Per Square Foot by project size
Concrete quantities include the site's 10% planning allowance.
| Size | Area | 4-inch yards | 5-inch yards | 6-inch yards | Modeled materials (4 in) | Materials + labor total (4 in) |
|---|---|---|---|---|---|---|
| 10x10 | 100 sq ft | 1.36 yd³ | 1.70 yd³ | 2.04 yd³ | $330–$660 | $600–$1,200 |
| 20x20 | 400 sq ft | 5.43 yd³ | 6.79 yd³ | 8.15 yd³ | $1,320–$2,640 | $2,400–$4,800 |
| 30x30 | 900 sq ft | 12.22 yd³ | 15.28 yd³ | 18.33 yd³ | $2,970–$5,940 | $5,400–$10,800 |
| 40x60 | 2,400 sq ft | 32.59 yd³ | 40.74 yd³ | 48.89 yd³ | $7,920–$15,840 | $14,400–$28,800 |
Cost columns use the main calculator's $6–$12/sq ft national baseline and 55% material / 45% labor model. Quantity uses the same 4-inch baseline and 10% allowance. Source: HomeGuide concrete slab cost; ready-mix values use HomeGuide concrete prices. Checked November 14, 2026.
Concrete cost per square foot is the common comparison unit for flatwork because area maps directly to forms, base preparation, finishing, joints, and crew time. A cubic-yard quote prices the wet concrete volume, but it does not describe excavation, reinforcement, placement, surface finish, or labor. Contractors can therefore use square-foot pricing for driveways, patios, sidewalks, and simple slabs with a defined thickness, then price unusual depth, access, pumping, demolition, or decorative work separately. The site's national installed baseline is $6–$12 per square foot at 4 inches. That range is divided into a modeled 55% material share and 45% labor share, matching the main calculator. When thickness rises, the model increases the material component in proportion to depth while leaving the baseline labor share unchanged; the conversion table below shows that calculation. A 5-inch slab contains 25% more concrete than a 4-inch slab over the same area, while a 6-inch slab contains 50% more. Real bids do not always scale that neatly because crew setup, travel, forms, finishing, and minimum-order charges are partly fixed. Use square-foot figures to compare equivalent written scopes, and use cubic yards to plan the concrete order. Before comparing totals, verify that every proposal uses the same area, thickness, allowance, reinforcement, finish, site preparation, delivery, pumping, and tax assumptions.
Concrete price per square foot by thickness
| Thickness | Modeled materials / sq ft | Modeled installed / sq ft |
|---|---|---|
| 4 inches | $3.30–$6.60 | $6.00–$12.00 |
| 5 inches | $4.13–$8.25 | $6.82–$13.65 |
| 6 inches | $4.95–$9.90 | $7.65–$15.30 |
Calculated from the site's $6–$12 national installed baseline, 55% material share, 45% labor share, and 4-inch baseline. Source: HomeGuide concrete slab cost. Checked November 14, 2026.
Concrete Cost Per Square Foot FAQ
Why is concrete quoted per square foot?
Square-foot pricing can combine the slab area with forming, base preparation, placement, finishing, joints, and labor. Cubic-yard pricing mainly describes concrete volume.
What is the national installed baseline per square foot?
The site calculator uses $6–$12 per square foot at the 4-inch baseline before project-specific scope and local adjustments. Source: HomeGuide; checked November 14, 2026.
How does thickness change the square-foot model?
The model increases the 55% material component in proportion to depth while retaining the baseline 45% labor component; actual bids may allocate costs differently.
Compare concrete cost by project type
estimate your concrete cost with custom dimensions, or compare concrete price by thickness.