2026 U.S. cost and quantity estimate
Concrete Foundation Cost
Compare concrete quantities at 4, 5, and 6 inches, modeled material costs, and national installed planning totals.
Concrete Foundation Cost by project size
Concrete quantities include the site's 10% planning allowance.
| Size | Area | 4-inch yards | 5-inch yards | 6-inch yards | Modeled materials (4 in) | Materials + labor total (4 in) |
|---|---|---|---|---|---|---|
| 20x20 | 400 sq ft | 5.43 yd³ | 6.79 yd³ | 8.15 yd³ | $1,320–$2,640 | $2,400–$4,800 |
| 24x24 | 576 sq ft | 7.82 yd³ | 9.78 yd³ | 11.73 yd³ | $1,900–$3,800 | $3,460–$6,910 |
| 30x40 | 1,200 sq ft | 16.30 yd³ | 20.37 yd³ | 24.44 yd³ | $3,960–$7,920 | $7,200–$14,400 |
| 40x60 | 2,400 sq ft | 32.59 yd³ | 40.74 yd³ | 48.89 yd³ | $7,920–$15,840 | $14,400–$28,800 |
Cost columns use the main calculator's $6–$12/sq ft national baseline and 55% material / 45% labor model. Quantity uses the same 4-inch baseline and 10% allowance. Source: HomeGuide concrete slab cost; ready-mix values use HomeGuide concrete prices. Checked November 14, 2026.
Concrete foundation cost cannot be compared by slab area alone because strip footings, raft foundations, and isolated spread footings use different units and carry loads differently. A continuous strip footing supports a wall or line of columns and is commonly priced per linear foot. A raft, or mat, foundation spreads reinforced concrete across most or all of the footprint and is commonly compared per square foot. An isolated footing supports a concentrated column or pier load and may be quoted per footing or per cubic yard. HomeGuide lists mat or raft foundations at $6–$12 per square foot and a general slab-foundation range of $6–$14 per square foot. Michigan's 2025 assessor cost manual lists selected level-grade continuous strip footings from $15.20 to $84.50 per linear foot depending on dimensions and reinforcement. A Kansas City commercial foundation contractor publishes $350–$600 per cubic yard for spread footings; that is a regional contractor range, not a national benchmark. The quantity table below remains a simple rectangular slab comparison at 4, 5, and 6 inches. It does not calculate footing trenches, thickened edges, grade beams, walls, piers, reinforcing schedules, vapor barriers, insulation, excavation, dewatering, or engineered soil improvements. Foundation dimensions must come from the approved structural design. Compare bids only when excavation, concrete strength, steel, forms, pumping, waterproofing, drainage, backfill, testing, inspections, and exclusions describe the same assembly.
Concrete foundation price by type
| Foundation type | Published unit price | Source basis |
|---|---|---|
| Continuous strip footing | $15.20–$84.50 / linear ft | Selected level-grade sizes and reinforcement levels |
| Mat / raft foundation | $6–$12 / sq ft | General installed range |
| Isolated / spread footing | $350–$600 / yd³ | Published Kansas City commercial range |
Sources: Michigan 2025 Assessor's Manual, HomeGuide foundation cost, and KC Concrete Contractors commercial foundations. Checked November 14, 2026. Units and regional scope differ, so these figures are not interchangeable.
Concrete Foundation Cost FAQ
How are foundation types priced?
Strip footings are commonly compared per linear foot, raft foundations per square foot, and isolated footings per unit or cubic yard. The units should not be mixed.
Does the slab table calculate complete foundation concrete?
No. It compares rectangular slab volume only and excludes footing trenches, walls, piers, grade beams, thickened edges, and other engineered elements.
What should a foundation quote include?
Compare excavation, soil work, concrete strength, reinforcement, forms, pumping, waterproofing, drainage, insulation, backfill, testing, inspections, and exclusions.
Compare concrete cost by project type
estimate your concrete cost with custom dimensions, or compare concrete price by thickness.