2026 U.S. cost and quantity estimate
Concrete Driveway Cost
Compare concrete quantities at 4, 5, and 6 inches, modeled material costs, and national installed planning totals.
Concrete Driveway Cost by project size
Concrete quantities include the site's 10% planning allowance.
| Size | Area | 4-inch yards | 5-inch yards | 6-inch yards | Modeled materials (4 in) | Materials + labor total (4 in) |
|---|---|---|---|---|---|---|
| 12x24 | 288 sq ft | 3.91 yd³ | 4.89 yd³ | 5.87 yd³ | $950–$1,900 | $1,730–$3,460 |
| 20x20 | 400 sq ft | 5.43 yd³ | 6.79 yd³ | 8.15 yd³ | $1,320–$2,640 | $2,400–$4,800 |
| 24x24 | 576 sq ft | 7.82 yd³ | 9.78 yd³ | 11.73 yd³ | $1,900–$3,800 | $3,460–$6,910 |
| 30x30 | 900 sq ft | 12.22 yd³ | 15.28 yd³ | 18.33 yd³ | $2,970–$5,940 | $5,400–$10,800 |
Cost columns use the main calculator's $6–$12/sq ft national baseline and 55% material / 45% labor model. Quantity uses the same 4-inch baseline and 10% allowance. Source: HomeGuide concrete slab cost; ready-mix values use HomeGuide concrete prices. Checked November 14, 2026.
Concrete driveway cost depends on thickness, reinforcement, drainage, finish, access, and the preparation below the slab. Four inches is a common planning depth for passenger-vehicle driveways on a properly prepared base. Five inches increases volume by 25% and is often considered where repeated vehicle loads or weaker conditions justify more concrete. Six inches uses 50% more concrete than a 4-inch slab of the same area and is a planning case for heavier trucks, equipment, or design-specific loads. Thickness is a structural decision, so soil, base compaction, reinforcement, climate, and local requirements should be confirmed before ordering. Wire mesh or rebar, control and isolation joints, thickened edges, removal of an old driveway, and concrete pumping can each add scope. Drainage also matters: the finished surface needs a planned slope so water moves away from buildings without creating a steep transition at the street. The first table keeps cost columns on the site's national calculator baseline so they remain comparable with other pages; HomeGuide's driveway-specific installed range is $6–$15 per square foot. Decorative colors, exposed aggregate, stamping, borders, and complex curves can move a quote above that range. Compare bids by written thickness, base depth, steel, joint layout, finish, drainage grading, curing, cleanup, and exclusions rather than by total alone.
Driveway-specific price and scope
| Driveway level | Installed price | Typical scope |
|---|---|---|
| Standard | $6–$10 / sq ft | Plain gray slab |
| Basic decorative | $10–$15 / sq ft | Stain, border, broom texture, or exposed aggregate |
| Mid-range decorative | $15–$20 / sq ft | Stamped pattern and multiple colors |
Source: HomeGuide concrete driveway cost. Checked November 14, 2026. Reinforcement, joints, removal, pumping, and drainage grading should be confirmed as separate written scope items.
Concrete Driveway Cost FAQ
How thick should a concrete driveway be?
Four inches is a common planning baseline for passenger vehicles. Five or 6 inches may be specified for heavier loads, but the final thickness depends on the structural design, soil, base, reinforcement, and local requirements.
How many yards are needed for a 20x20 driveway?
The site model gives 5.43 cubic yards at 4 inches, 6.79 yards at 5 inches, or 8.15 yards at 6 inches, including the 10% planning allowance.
What should a driveway quote itemize?
Ask for thickness, base preparation, reinforcement, joints, finish, drainage slope, access, pumping, curing, demolition, cleanup, and exclusions in writing.
Compare concrete cost by project type
estimate your concrete cost with custom dimensions, or compare concrete price by thickness.